Couldn't load pickup availability
**Vent Kit Inlcuded**
For installations of the gas-powered model. Installation kit for the Cinderella Gas consisting of pipes and clamps, for a complete installation in combination with the parts included with your Cinderella Incineration Toilet. Feel free to contact us for assistance in order to install correctly according to the Canada Gas Code specifications.
The kit includes:
5 x tube with sleeve
5 x connector ring
3 x wall mount with 4 x pipe clamp
1 universal ball valve siphon
1 venting male / female elbow with condensation drain
**500 Bowl Liners Included**
No Septic? No Problem!
The Cinderella Gas incineration toilet uses propane to burn biological waste at high temperatures (with no odour) and leaves only a small amount of ash.
Perfect for locations with limited or no electricity. No plumbing or septic is required.
Power Requirements: Toilet requires 4 amps on start up and 1.3 amps during incineration to power the fan. Toilet requires only 0.005 amps while in standby (not incinerating) mode. This model is fitted with a 12V DC plug that can be connected to a small off-grid solar power system. A 120V AC power adaptor is available at an additional cost.
|
|||
|
|||
Weight: 75 lbs (34 kg)
Height: 23 5/8 in. (600 mm)
Seat Height: 21 1/4 in. (540 mm)
Width: 15 3/8 in. (390 mm)
Depth: 23 1/4 in. (590 mm)
Capacity: 3-4 visits per hour
Ventilation ducts/pipes: 110 mm (external)
Standby power consumption: 0.005 Amp
Power consumption (incineration): 1.3 Amp
Gas consumption (single): 160 – 190 grams
Max Burner effect:
9390 BRU/h (2752W)
Power requirements:
12V DC 11-14.4V, 4 Amp
Approvals: UL/C-UL